Normal Force
Acts perpendicular to the contact surface. Its magnitude depends on the forces acting on the object and the geometry of the contact.
Forces and Motion
Why is it harder to push a heavy box across the floor? What keeps your shoes from slipping when you walk? Friction and normal force help explain how objects interact with surfaces, whether they remain at rest or begin to slide.
Friction is a contact force that opposes relative motion, or the tendency for relative motion, between surfaces in contact. It acts parallel to the contact surface.
The normal force is a contact force exerted by a surface perpendicular to itself. It prevents objects from passing through the surface and responds to the forces pressing the surfaces together.
Acts perpendicular to the contact surface. Its magnitude depends on the forces acting on the object and the geometry of the contact.
Prevents relative sliding between surfaces that are not slipping. Its magnitude adjusts as needed, up to a maximum value.
Acts when surfaces slide relative to each other. In the basic model, its magnitude is proportional to the normal force.
Imagine pushing a heavy box across a floor. Before it moves, static friction can balance your push. Once the box begins sliding, kinetic friction opposes its motion. The floor also pushes upward on the box through the normal force.
Friction and normal force are contact forces. Their behavior can be analyzed using Newton's laws of motion. The common friction equations are simplified experimental models that work well for many everyday surfaces.
Consider an object resting on a horizontal floor. If the only vertical forces are its weight downward and the normal force upward, and there is no vertical acceleration, the forces must balance.
This result applies only under the stated conditions. If another force has a vertical component, or the object accelerates vertically, the normal force may be different from mg.
Static friction adjusts to prevent sliding until the applied force exceeds the maximum friction the surfaces can provide.
The maximum possible static friction is:
The coefficient μs describes static friction for the contacting surfaces. The actual static friction may be smaller than this maximum.
When the surfaces slide relative to one another, the basic kinetic friction model uses a different coefficient:
Kinetic friction acts opposite the relative sliding direction. In many common situations, the kinetic friction coefficient is lower than the static friction coefficient, although this is not a universal rule for all materials and conditions.
To solve a friction problem, identify the contact surface, determine the normal force, and decide whether the surfaces are slipping.
The force perpendicular to the contact surface, measured in newtons (N).
The friction force acting when the surfaces do not slide relative to one another, measured in newtons (N).
The friction force acting during relative sliding, measured in newtons (N).
A dimensionless coefficient used to calculate the maximum static friction force.
A dimensionless coefficient used to estimate friction during sliding.
The object's mass, measured in kilograms (kg).
In the basic friction model, a larger normal force produces a larger maximum static friction and a larger kinetic friction force when the coefficients remain unchanged.
For example, if the normal force doubles while the kinetic friction coefficient stays constant, the predicted kinetic friction force also doubles.
A 5 kg box resting on a horizontal floor has a normal force of 49 N when no other vertical forces act on it. If the kinetic friction coefficient is 0.2, its kinetic friction force while sliding is 9.8 N.
Static friction between your shoes and the ground helps you push forward without your feet sliding backward.
A piece of furniture may require a larger force to start moving than to keep sliding, depending on the friction coefficients of the contacting surfaces.
Tires rely on friction to accelerate, brake, and turn. When tires roll without slipping at the contact point, static friction is involved.
The normal force acts perpendicular to the ramp. Friction acts along the surface and may prevent or oppose sliding.
A 10 kg box rests on a horizontal floor. A student pushes it horizontally with a force of 50 N. The coefficient of static friction is 0.4, and the coefficient of kinetic friction is 0.3. Determine whether the box moves and calculate its acceleration.
The box has a mass of 10 kg, and the applied horizontal force is 50 N. The coefficients are μs = 0.4 and μk = 0.3.
Use g = 9.8 m/s². Assume the box starts from rest and the only vertical forces are weight and normal force.
Since the push is horizontal and the box has no vertical acceleration, the normal force equals its weight.
Find the largest static friction force that can oppose the push.
The applied force of 50 N exceeds 39.2 N, so static friction cannot keep the box at rest. It begins sliding.
Once the box slides, use the kinetic friction coefficient.
Choose the direction of the applied force as positive. Subtract kinetic friction to find the net horizontal force, then apply Newton's second law.
The applied force exceeds the maximum static friction, so the box begins sliding. Kinetic friction then opposes the motion, leaving a net force of 20.6 N and an acceleration of 2.06 m/s².
Try the calculator
Apply these concepts to a block on a slope. Explore how the incline angle, normal force, and static and kinetic friction affect whether the block moves.
N = mg applies only under specific conditions. On a slope, or when additional vertical forces act, the normal force may be different.
Static friction adjusts to oppose impending sliding. Its actual value can be smaller than μsN.
Kinetic friction applies when surfaces slide relative to one another. For surfaces that are not slipping, evaluate static friction first.
Friction opposes relative sliding or the tendency to slide at the contact. Its direction is not always opposite the object's overall motion.
Key takeaway
Normal force acts perpendicular to a contact surface, while friction acts parallel to it. Static friction can prevent sliding and varies up to a maximum value. Kinetic friction applies during sliding. To solve a friction problem, determine the normal force, identify the friction type, and use Newton's second law to calculate the resulting motion.
Continue Learning
Continue studying how contact forces affect objects on horizontal and inclined surfaces.